Buy istitutoaltierospinelli.eu ?
We are moving the project
istitutoaltierospinelli.eu .
Are you interested in purchasing the domain
istitutoaltierospinelli.eu ?
domain@kv-gmbh.de · 0541-91531010
Buy istitutoaltierospinelli.eu ?
How to store Li-Po and Li-Ion batteries?
To store Li-Po and Li-Ion batteries, it is important to keep them at a stable temperature between 20-25°C (68-77°F) and away from direct sunlight. It is also important to store them in a dry and well-ventilated area to prevent moisture buildup. Additionally, it is recommended to store the batteries at a partial charge, around 40-60%, to prevent over-discharge or overcharging. Finally, it is important to store the batteries in a fireproof container or bag to minimize the risk of fire in case of a malfunction. **
Is a Li-Po or Li-Ion battery more dangerous?
Both Li-Po and Li-Ion batteries have the potential to be dangerous if mishandled or damaged. However, Li-Po batteries are generally considered to be more volatile and have a higher risk of catching fire or exploding compared to Li-Ion batteries. This is due to the different electrolyte composition and packaging of the two battery types. It is important to handle both types of batteries with care and follow proper charging and storage guidelines to minimize the risk of accidents. **
Similar search terms for Erbauer-Li-ion-EXT-keep
Top-Angebote
Products related to Erbauer-Li-ion-EXT-keep:
-
Xtar MC6C USB Battery Charger for Li-ion BatteriesA market leader within its category, the portable Xtar MC6C charger can charge up to six lithium-ion batteries at once, depending on cell type. Easy to use, it can be connected to your mains, vehicle or PC though a micro-USB or DC input for on-the-go charging. This charger set does include a a USB-C to USB-C cable, but an adapter is not provided, though one can be added to your order in the ‘optional bundle’ section on this page. We recommend that if you are using your own adaptor, that it is 15W as this is required for optimum performance. This cost-effective charger has a clear LCD display, with gives a reading of both the charging current and the battery power. It has the ability to charge three ports with a constant current of 1 Amp or six ports with a constant current of 0.5 Amps. Therefore, less batteries will result in a faster charge. A 0 Volt sensor has also been included, which means it can revive discharged batteries for maximum cell performance. Additional features include: Suitable for product size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700 (unprotected), 22650, 25500, 26650 and Flat-32650. Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells except protected 21700/20700. Can recharge two 26650 batteries in CH1 and CH4 plus four 18650 cells in CH2 to CH5 simultaneously. Self-adjusting output enables continued functioning, even with low power input. Anti-reverse polarity indication, with short circuit and over-temperature protection. Robust design with flame-retardant and fire-resistant ABS casing Operating temperature limits: 0°C minimum to 40°C. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) AA/AAA 1.5V Li-ion charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This high-quality charger also comes with a twelve-month manufacturer's warranty. Dimensions: 111mm (length) x 148mm (width) x 34 millimetres (height). Net weight: 205 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter16,49 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VP4 Plus Dragon Charger Set for Li-Ion BatteriesUnlock the True Potential of Your Batteries: Introducing the Xtar VP4 Dragon, Your Battery's Personal Trainer. Powerful, intelligent, and versatile—the Xtar VP4 Dragon is here to transform your battery charging experience. It's designed to not only charge your 3.7V Li-ion batteries as well as 1.2V AA & AAA NiMH; but also to maximize their lifespan, performance, and overall health. Here's how the VP4 Dragon elevates your battery game: 4-Bay Charging Powerhouse: Fuel up to four batteries simultaneously, with each bay operating independently. This means you can mix and match battery types and sizes without compromising charging efficiency. Universal Battery Compatibility: The VP4 Dragon welcomes a wide range of battery guests, including 3.7V lithium-ion 18650, 26650, 14500, 16340, and NiMH AA and AAA. It's your one-stop charging solution for virtually any battery in your arsenal. Smart Charging Technology: This charger goes beyond basic power delivery. It intelligently analyzes each battery and selects the optimal charging current, ensuring maximum lifespan, performance, and safety. Advanced Battery Care Features: Dig deeper into your battery health with the VP4 Dragon's capacity testing, internal resistance measurement, and refresh mode. These tools help you identify tired cells and take proactive steps to revitalize them. Intuitive LCD Interface: Stay informed with a clear display that shows real-time charging progress, voltage, and internal resistance for each battery. No more guesswork, just complete control. Comprehensive Safety Features: Rest assured that your batteries and the charger are protected against overcharging, over-discharging, reverse polarity, and short circuits. The VP4 Dragon prioritizes safety at every level. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 8 (applies when charging 8 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 4 / 0.5A × 8 (applies when charging 1–8 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. The VP4 Dragon is more than a charger. It's a performance optimizer, and a trusted guardian of your power sources. Experience the difference intelligent charging can make and unlock the true potential of your batteries. Please note: To unleash the full charging speed of the VP4 Dragon, a separate power USB adapter is required (not included). Select 'optional bundle' when adding to cart. Ready to empower your batteries and simplify your charging life? Order your Xtar VP4 Dragon today!62,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Panasonic EYC232PN Twin Pack – 18V 2 x 3.0Ah Li-ion BatteriesOverview: The Panasonic EYC232PN Twin Pack provides two 18V 3.0Ah Li-ion batteries, designed to deliver reliable power for your Panasonic cordless tools. These batteries offer long-lasting performance and are compatible with a range of Panasonic 18V tools, ensuring you have the power needed to complete your tasks efficiently. Product Description: Enhance your productivity with the Panasonic EYC232PN Twin Pack. Each 18V 3.0Ah Li-ion battery is engineered to provide consistent power, reducing downtime and increasing the efficiency of your cordless tools. The compact design allows for easy handling and storage, making them ideal for both professional and DIY applications. Whether you're working on construction sites or home improvement projects, these batteries ensure your tools perform at their best. Key Features: Capacity: Each battery offers 3.0Ah capacity for extended runtime. Voltage: 18V power output suitable for a wide range of tools. Battery Type: Li-ion technology for lightweight and efficient power storage. Compatibility: Designed for use with Panasonic 18V cordless tools. Design: Compact and ergonomic for ease of use and storage. Durability: Built to withstand demanding work environments.599,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Makita DGA463Z 18V Li-Ion LXT Brushless 115mm Angle Grinder (Body Only)Overview The Makita DGA463Z 18V LXT Brushless Angle Grinder is a high-performance cordless tool designed for professional cutting and grinding applications. Powered by Makita’s 18V LXT battery system (battery and charger not included), it delivers powerful, consistent performance with the efficiency of a brushless motor. Compact, durable, and feature-rich, it’s built for tradespeople and serious DIY users who need reliability and precision on the job. Key Features Brushless motor for increased efficiency, longer runtime, and extended tool life 115mm (4.5") disc size for versatile cutting and grinding tasks Variable speed control (approx. 3,000–8,500 RPM) for different applications Automatic Torque Drive Technology (ADT) adjusts speed under load Active Feedback Sensing Technology (AFT) shuts down tool for safety Anti-restart function prevents accidental start-up Slide switch with lock-on for continuous operation Compact, ergonomic design for improved control and comfort Dust and debris protection for durability in tough environments Benefits The Makita DGA463Z is designed to deliver professional-level performance without the limitations of a cord. Its brushless motor ensures longer runtime and reduced maintenance, making it ideal for demanding tasks on-site or in the workshop. The intelligent ADT system automatically adjusts speed and torque depending on the load, giving you optimal performance whether cutting metal, grinding surfaces, or working on tougher materials. Meanwhile, AFT safety technology adds an extra layer of protection by shutting down the tool if abnormal rotation is detected. Its lightweight and ergonomic build allow for better control and reduced fatigue during extended use. As part of the Makita 18V LXT ecosystem, it’s perfect for users who already own compatible batteries and want a powerful, flexible addition to their toolkit. Specifications Table Specification Details Model Makita DGA463Z Voltage 18V (LXT Lithium-Ion) Motor Type Brushless Disc Diameter 115mm (4.5") No Load Speed 3,000 – 8,500 RPM Spindle Thread M14 Switch Type Slide Switch Safety Features AFT, Anti-Restart Technology ADT (Automatic Torque Drive) Weight Approx. 2.3kg (with battery) Battery Included No (Body Only)139,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Why are Li-ion batteries charged flat?
Li-ion batteries are charged flat to maximize their lifespan and performance. Charging them to full capacity can cause stress on the battery, leading to degradation over time. By charging them to a lower capacity, such as 80%, the battery experiences less stress and can maintain its capacity and performance for a longer period. Additionally, charging Li-ion batteries to a lower capacity can also reduce the risk of overcharging, which can be a safety hazard. **
-
What is the difference between a Li-Ion and a Li-Poly battery?
The main difference between a Li-Ion (Lithium-Ion) and a Li-Poly (Lithium-Polymer) battery is the electrolyte used in each. Li-Ion batteries use a liquid electrolyte, while Li-Poly batteries use a solid or gel-like electrolyte. This allows Li-Poly batteries to be more flexible in shape and size, making them ideal for thinner devices. Li-Poly batteries also tend to have a lower risk of leakage and can provide slightly higher energy density compared to Li-Ion batteries. **
-
Does a Li-ion and Li-Po battery swell in a stored state?
Yes, both Li-ion and Li-Po batteries can swell in a stored state. This swelling can occur due to a variety of factors such as overcharging, exposure to high temperatures, or simply aging. When a battery swells, it can become damaged and potentially pose a safety risk. It is important to store these batteries in a cool, dry place and to avoid overcharging them to prevent swelling. **
-
Is a 2-cell Li-ion battery sufficient?
The sufficiency of a 2-cell Li-ion battery depends on the specific application and power requirements. For some low-power devices such as small electronic gadgets or wearables, a 2-cell Li-ion battery may be sufficient. However, for more power-hungry devices such as laptops or electric vehicles, a 2-cell battery may not provide enough capacity and voltage to meet the demands of the application. It's important to consider the power needs and space constraints of the device when determining if a 2-cell Li-ion battery is sufficient. **
How do you charge a Li-Ion battery?
To charge a Li-Ion battery, you will need a compatible charger specifically designed for Li-Ion batteries. First, plug the charger into a power source and then connect the battery to the charger. Make sure to use the correct voltage and current settings on the charger to avoid damaging the battery. Allow the battery to charge fully before disconnecting it from the charger. It's important to follow the manufacturer's instructions and safety guidelines when charging Li-Ion batteries to ensure proper and safe charging. **
Is the current too high in Li-Ion 21700?
The current in a Li-Ion 21700 battery can be too high if it exceeds the recommended charging or discharging rates specified by the manufacturer. High currents can lead to overheating, reduced battery life, and even safety hazards such as thermal runaway. It is important to follow the manufacturer's guidelines and use appropriate charging equipment to prevent excessive currents in Li-Ion 21700 batteries. **
Top-Angebote
Products related to Erbauer-Li-ion-EXT-keep:
-
Erbauer Li-ion EXT keep cool 18V Cordless Jigsaw (1 x 4Ah) - ERI1087JSW, NewOverview: The Erbauer EXT 18V Cordless Jigsaw delivers powerful, precise cutting with the convenience of cordless freedom. Featuring brushless motor technology and Keep Cool system, it ensures efficient performance and prevents overheating during extended use. Equipped with a 4Ah battery for longer runtime, this jigsaw is ideal for professionals and DIY enthusiasts tackling various materials. Key Features: Brushless motor for enhanced efficiency and durability Keep Cool technology to maintain optimal tool temperature Variable speed control for accurate cutting on different materials Tool-free blade change system for quick and easy blade swaps Durable aluminium base plate for stability and precision LED work light to improve visibility in low-light areas Dust extraction port to keep your workspace clean Ergonomic soft-grip handle for comfortable use Product Description: The Erbauer Li-ion EXT Keep Cool 18V Cordless Jigsaw combines power, precision, and convenience in one compact tool. Its brushless motor offers longer life and improved performance, while the Keep Cool system prevents overheating to maintain consistent cutting speed. With variable speed control and tool-free blade changes, this jigsaw adapts easily to different materials and projects. The aluminium base plate ensures steady cutting, and the LED work light enhances visibility. Lightweight and ergonomic, it reduces user fatigue for extended working periods. Perfect for both professional tradespeople and home DIYers. Charger+ battery+tool114,99 £*Shipping: 0,00 £Secure redirect to the provider
-
Xtar MC4S Charger for Li-ion BatteriesHighly efficient, the new Xtar MC4S charges up to four Ni-MH, Ni-CD or Li-ion batteries at once. It represents excellent value and is a respected leader in its category. This pack includes a USB-C to USB-C power cable; however, a USB wall adapter is not included in this set, but the option to add one on is available in the bundles section above. We recommend if you are going to use your own adaptor, to check that it is 15W as this is required for optimal performance. Convenient to use worldwide, this charger is compatible with wall adapters, smartphone and solar chargers as well as power banks and computers. To ensure your batteries receive high-quality charging, Xtar have included a self-selected 0V trickle charge phase especially for totally discharged cells, to maximise battery life. It will also automatically switch between constant current fast charge, to constant voltage phase when the batteries are near the end of their charging cycle, for full battery potential. Additional features include: Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells, including size codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500 and 26650. Accepts two 26650 batteries (CH1 and CH4) and two unprotected type 21700 batteries (in CH2 and CH3) simultaneously. Not for use with protected type 20700 and 21700 cells. Charging current of 1 Amp (through two ports) or 0.5A (through four ports). The higher the Amp, the quicker the battery will charge, with a maximum potential: 4.2 Volts. Operating temperature range: 0°C (minimum) to 40° Celsius (maximum). Flame-retardant casing. Xtar have also ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 2 (applies when charging 2 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. so ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Dimensions: 100mm (length) x 97mm (width) x 26.5 millimetres (height). Net weight: 95 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter13,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MC6C USB Battery Charger for Li-ion BatteriesA market leader within its category, the portable Xtar MC6C charger can charge up to six lithium-ion batteries at once, depending on cell type. Easy to use, it can be connected to your mains, vehicle or PC though a micro-USB or DC input for on-the-go charging. This charger set does include a a USB-C to USB-C cable, but an adapter is not provided, though one can be added to your order in the ‘optional bundle’ section on this page. We recommend that if you are using your own adaptor, that it is 15W as this is required for optimum performance. This cost-effective charger has a clear LCD display, with gives a reading of both the charging current and the battery power. It has the ability to charge three ports with a constant current of 1 Amp or six ports with a constant current of 0.5 Amps. Therefore, less batteries will result in a faster charge. A 0 Volt sensor has also been included, which means it can revive discharged batteries for maximum cell performance. Additional features include: Suitable for product size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700 (unprotected), 22650, 25500, 26650 and Flat-32650. Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells except protected 21700/20700. Can recharge two 26650 batteries in CH1 and CH4 plus four 18650 cells in CH2 to CH5 simultaneously. Self-adjusting output enables continued functioning, even with low power input. Anti-reverse polarity indication, with short circuit and over-temperature protection. Robust design with flame-retardant and fire-resistant ABS casing Operating temperature limits: 0°C minimum to 40°C. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) AA/AAA 1.5V Li-ion charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This high-quality charger also comes with a twelve-month manufacturer's warranty. Dimensions: 111mm (length) x 148mm (width) x 34 millimetres (height). Net weight: 205 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter16,49 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VP4 Plus Dragon Charger Set for Li-Ion BatteriesUnlock the True Potential of Your Batteries: Introducing the Xtar VP4 Dragon, Your Battery's Personal Trainer. Powerful, intelligent, and versatile—the Xtar VP4 Dragon is here to transform your battery charging experience. It's designed to not only charge your 3.7V Li-ion batteries as well as 1.2V AA & AAA NiMH; but also to maximize their lifespan, performance, and overall health. Here's how the VP4 Dragon elevates your battery game: 4-Bay Charging Powerhouse: Fuel up to four batteries simultaneously, with each bay operating independently. This means you can mix and match battery types and sizes without compromising charging efficiency. Universal Battery Compatibility: The VP4 Dragon welcomes a wide range of battery guests, including 3.7V lithium-ion 18650, 26650, 14500, 16340, and NiMH AA and AAA. It's your one-stop charging solution for virtually any battery in your arsenal. Smart Charging Technology: This charger goes beyond basic power delivery. It intelligently analyzes each battery and selects the optimal charging current, ensuring maximum lifespan, performance, and safety. Advanced Battery Care Features: Dig deeper into your battery health with the VP4 Dragon's capacity testing, internal resistance measurement, and refresh mode. These tools help you identify tired cells and take proactive steps to revitalize them. Intuitive LCD Interface: Stay informed with a clear display that shows real-time charging progress, voltage, and internal resistance for each battery. No more guesswork, just complete control. Comprehensive Safety Features: Rest assured that your batteries and the charger are protected against overcharging, over-discharging, reverse polarity, and short circuits. The VP4 Dragon prioritizes safety at every level. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 8 (applies when charging 8 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 4 / 0.5A × 8 (applies when charging 1–8 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. The VP4 Dragon is more than a charger. It's a performance optimizer, and a trusted guardian of your power sources. Experience the difference intelligent charging can make and unlock the true potential of your batteries. Please note: To unleash the full charging speed of the VP4 Dragon, a separate power USB adapter is required (not included). Select 'optional bundle' when adding to cart. Ready to empower your batteries and simplify your charging life? Order your Xtar VP4 Dragon today!62,95 £*Shipping: 2,49 £Secure redirect to the provider
-
How to store Li-Po and Li-Ion batteries?
To store Li-Po and Li-Ion batteries, it is important to keep them at a stable temperature between 20-25°C (68-77°F) and away from direct sunlight. It is also important to store them in a dry and well-ventilated area to prevent moisture buildup. Additionally, it is recommended to store the batteries at a partial charge, around 40-60%, to prevent over-discharge or overcharging. Finally, it is important to store the batteries in a fireproof container or bag to minimize the risk of fire in case of a malfunction. **
-
Is a Li-Po or Li-Ion battery more dangerous?
Both Li-Po and Li-Ion batteries have the potential to be dangerous if mishandled or damaged. However, Li-Po batteries are generally considered to be more volatile and have a higher risk of catching fire or exploding compared to Li-Ion batteries. This is due to the different electrolyte composition and packaging of the two battery types. It is important to handle both types of batteries with care and follow proper charging and storage guidelines to minimize the risk of accidents. **
-
Why are Li-ion batteries charged flat?
Li-ion batteries are charged flat to maximize their lifespan and performance. Charging them to full capacity can cause stress on the battery, leading to degradation over time. By charging them to a lower capacity, such as 80%, the battery experiences less stress and can maintain its capacity and performance for a longer period. Additionally, charging Li-ion batteries to a lower capacity can also reduce the risk of overcharging, which can be a safety hazard. **
-
What is the difference between a Li-Ion and a Li-Poly battery?
The main difference between a Li-Ion (Lithium-Ion) and a Li-Poly (Lithium-Polymer) battery is the electrolyte used in each. Li-Ion batteries use a liquid electrolyte, while Li-Poly batteries use a solid or gel-like electrolyte. This allows Li-Poly batteries to be more flexible in shape and size, making them ideal for thinner devices. Li-Poly batteries also tend to have a lower risk of leakage and can provide slightly higher energy density compared to Li-Ion batteries. **
Similar search terms for Erbauer-Li-ion-EXT-keep
-
Panasonic EYC232PN Twin Pack – 18V 2 x 3.0Ah Li-ion BatteriesOverview: The Panasonic EYC232PN Twin Pack provides two 18V 3.0Ah Li-ion batteries, designed to deliver reliable power for your Panasonic cordless tools. These batteries offer long-lasting performance and are compatible with a range of Panasonic 18V tools, ensuring you have the power needed to complete your tasks efficiently. Product Description: Enhance your productivity with the Panasonic EYC232PN Twin Pack. Each 18V 3.0Ah Li-ion battery is engineered to provide consistent power, reducing downtime and increasing the efficiency of your cordless tools. The compact design allows for easy handling and storage, making them ideal for both professional and DIY applications. Whether you're working on construction sites or home improvement projects, these batteries ensure your tools perform at their best. Key Features: Capacity: Each battery offers 3.0Ah capacity for extended runtime. Voltage: 18V power output suitable for a wide range of tools. Battery Type: Li-ion technology for lightweight and efficient power storage. Compatibility: Designed for use with Panasonic 18V cordless tools. Design: Compact and ergonomic for ease of use and storage. Durability: Built to withstand demanding work environments.599,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Makita DGA463Z 18V Li-Ion LXT Brushless 115mm Angle Grinder (Body Only)Overview The Makita DGA463Z 18V LXT Brushless Angle Grinder is a high-performance cordless tool designed for professional cutting and grinding applications. Powered by Makita’s 18V LXT battery system (battery and charger not included), it delivers powerful, consistent performance with the efficiency of a brushless motor. Compact, durable, and feature-rich, it’s built for tradespeople and serious DIY users who need reliability and precision on the job. Key Features Brushless motor for increased efficiency, longer runtime, and extended tool life 115mm (4.5") disc size for versatile cutting and grinding tasks Variable speed control (approx. 3,000–8,500 RPM) for different applications Automatic Torque Drive Technology (ADT) adjusts speed under load Active Feedback Sensing Technology (AFT) shuts down tool for safety Anti-restart function prevents accidental start-up Slide switch with lock-on for continuous operation Compact, ergonomic design for improved control and comfort Dust and debris protection for durability in tough environments Benefits The Makita DGA463Z is designed to deliver professional-level performance without the limitations of a cord. Its brushless motor ensures longer runtime and reduced maintenance, making it ideal for demanding tasks on-site or in the workshop. The intelligent ADT system automatically adjusts speed and torque depending on the load, giving you optimal performance whether cutting metal, grinding surfaces, or working on tougher materials. Meanwhile, AFT safety technology adds an extra layer of protection by shutting down the tool if abnormal rotation is detected. Its lightweight and ergonomic build allow for better control and reduced fatigue during extended use. As part of the Makita 18V LXT ecosystem, it’s perfect for users who already own compatible batteries and want a powerful, flexible addition to their toolkit. Specifications Table Specification Details Model Makita DGA463Z Voltage 18V (LXT Lithium-Ion) Motor Type Brushless Disc Diameter 115mm (4.5") No Load Speed 3,000 – 8,500 RPM Spindle Thread M14 Switch Type Slide Switch Safety Features AFT, Anti-Restart Technology ADT (Automatic Torque Drive) Weight Approx. 2.3kg (with battery) Battery Included No (Body Only)139,00 £*Shipping: 0,00 £Secure redirect to the provider
-
DeWalt Combi Drill Cordless 18V 2x5.0Ah Li-Ion DCD789P2T-GB Brushless Compact.gadcet-pdp{--g-green:#00a651;color:#1f2430;line-height:1.55;font-size:inherit;max-width:760px}.gadcet-pdp>*:first-child{margin-top:0}.gadcet-pdp p{margin:0 0.9em}.gadcet-pdp h3{font-size:1.05em;font-weight:600;color:#11161f;margin:1.4em 0.5em;padding-left:.5em;border-left:3px solid var(--g-green);border-radius:0;line-height:1.3}.gadcet-pdp ul{list-style:none!important;margin:0 0.9em;padding:0!important}.gadcet-pdp ul li{position:relative;padding:.1em 0.1em 1.5em;margin:0}.gadcet-pdp ul li::before{content:"";position:absolute;left:.16em;top:.45em;width:.36em;height:.66em;border:solid var(--g-green);border-width:0.14em.14em 0;transform:rotate(45deg)}.gadcet-pdp table{width:100%;border-collapse:collapse;margin:.3em 0 1em;font-size:.95em;border:1px solid #e7e9ee!important;border-radius:8px;overflow:hidden}.gadcet-pdp table td{padding:.5em.8em;border-bottom:1px solid #eef0f4!important;vertical-align:top}.gadcet-pdp table tr:last-child td{border-bottom:0!important}.gadcet-pdp table tr:nth-child(even){background:#f7f9f8}.gadcet-pdp table td:first-child{font-weight:600;color:#454c59;width:40%}@media (max-width:600px){.gadcet-pdp table td:first-child{width:42%}} Meet the DEWALT DCD789P2T-GB 18V XR Brushless Compact Combi Drill – a powerful, ultra-compact cordless drill that delivers up to 68Nm of torque for demanding drilling, hammer drilling and screwdriving tasks, even in the tightest spaces. Key Features 68Nm maximum torque – substantial driving force in a short, lightweight body Ultra-compact 164mm body – easier access inside cabinets, between joists and around pipework Approximately 19% shorter than the DCD778 model Brushless motor – reduced mechanical wear and improved efficiency Two 5.0Ah XR lithium-ion batteries – long runtime and one battery can charge while the other is in use Two-speed all-metal gearbox – 0–450rpm for controlled screwdriving and 0–1,650rpm for faster drilling Hammer action up to 28,050 impacts per minute – suitable for masonry applications with the correct bit 15 adjustable torque settings – tailor output to different fasteners and materials 13mm keyless chuck – quick accessory changes without a chuck key LED work light – illuminates dark workspaces Electronic brake – stops rotation quickly after release Supplied in a DEWALT TSTAK case – complete and ready to use Benefits Work comfortably in confined spaces – the compact design reduces fatigue and improves access Powerful performance – 68Nm torque handles tough materials without the bulk Long runtime – two 5.0Ah batteries keep you working for longer between charges Versatile – drill, hammer drill and screwdrive across wood, metal and masonry Professional quality – built for demanding jobs on site or in the workshop Specifications Max torque 68Nm Body length (front to back) 164mm Weight (tool only) Approx. 1.15kg First gear speed 0–450rpm Second gear speed 0–1,650rpm Impact rate Up to 28,050bpm Torque settings 15 Chuck size 13mm keyless Battery 2x 18V XR 5.0Ah Li-Ion Charging...189,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Xtar MC2 Plus Portable USB Battery Charger Set for Li-ion BatteriesThe versatile Xtar MC2 Plus USB battery charger set for specialist Li-ion batteries has an easy to read display and offers you the convenience of charging two cells at once. This charger is highly portable, suitable for on the go charging with its USB micro-charging port power source. Additionally, using innovative technology, it also has a 0V reactivation function, which allows it to bring over-discharged batteries back to life. Other features include: Can charge following battery sizes: 3.6/3.7V Li-ion, IMR, INR and ICR batteries in addition to size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700. Can charge two channels with a constant current of 1 Amp each or one channel at a constant current of 2 Amps. The higher the current, the faster the charge. Recommended operating temperature: 0°C - 40 degrees Celsius. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 1 (applies when charging 1 battery) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Xtar has also prioritised safety features, with this fire-retardant charger having the ability to detect reverse polarity and short circuit conditions, all whilst monitoring the temperature to ensure protection against over-heating. This competitively priced charger also comes with a twelve-month manufacturer’s warranty. It should be noted a USB adapter is not included, but in ‘optional bundle’ section above, one can be added to your order. If you use your own USB adaptor, a 15W adaptor is required for the unit to charge at full speed. This charger is not suitable for charging protected cells. Dimensions: 9.6 centimetres (length) by 4.7cm (width) by 2.6cm (height). OPTIONAL BUNDLE: None, Inc. Wall Adapter10,75 £*Shipping: 2,49 £Secure redirect to the provider
-
Does a Li-ion and Li-Po battery swell in a stored state?
Yes, both Li-ion and Li-Po batteries can swell in a stored state. This swelling can occur due to a variety of factors such as overcharging, exposure to high temperatures, or simply aging. When a battery swells, it can become damaged and potentially pose a safety risk. It is important to store these batteries in a cool, dry place and to avoid overcharging them to prevent swelling. **
-
Is a 2-cell Li-ion battery sufficient?
The sufficiency of a 2-cell Li-ion battery depends on the specific application and power requirements. For some low-power devices such as small electronic gadgets or wearables, a 2-cell Li-ion battery may be sufficient. However, for more power-hungry devices such as laptops or electric vehicles, a 2-cell battery may not provide enough capacity and voltage to meet the demands of the application. It's important to consider the power needs and space constraints of the device when determining if a 2-cell Li-ion battery is sufficient. **
-
How do you charge a Li-Ion battery?
To charge a Li-Ion battery, you will need a compatible charger specifically designed for Li-Ion batteries. First, plug the charger into a power source and then connect the battery to the charger. Make sure to use the correct voltage and current settings on the charger to avoid damaging the battery. Allow the battery to charge fully before disconnecting it from the charger. It's important to follow the manufacturer's instructions and safety guidelines when charging Li-Ion batteries to ensure proper and safe charging. **
-
Is the current too high in Li-Ion 21700?
The current in a Li-Ion 21700 battery can be too high if it exceeds the recommended charging or discharging rates specified by the manufacturer. High currents can lead to overheating, reduced battery life, and even safety hazards such as thermal runaway. It is important to follow the manufacturer's guidelines and use appropriate charging equipment to prevent excessive currents in Li-Ion 21700 batteries. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.